WANTED: Aftermarket performance cam for 302 February 17, 2015, 06:25:49 PM Currently searching for a used performance roller cam for my '79 Cobra build. Carbed 302, 10.5:1 compression, GT40 heads.Post or PM me if you have one. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #1 – February 17, 2015, 06:57:22 PM Guessing my mid .600 lift hydraulic roller nitrous cam is a no go for you. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #2 – February 17, 2015, 09:18:01 PM Quote from: jandmmustangs;444816Guessing my mid .600 lift hydraulic roller nitrous cam is a no go for you.That may be a tad much for my combo. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #3 – February 17, 2015, 09:29:10 PM I'd think an E303 cam would be right up your alley..not much help to you though..I'm looking for a deal on one for myself. LOLI do have a Wolverine Blue Racer cam...it's not quite the lift and duration of the E cam... Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #4 – February 18, 2015, 08:27:02 PM really?so do Iits old Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #5 – February 19, 2015, 03:34:18 AM What intake do you plan on running? Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #6 – February 19, 2015, 09:18:19 PM Quote from: V8Demon;444949What intake do you plan on running?Going to start off with an Edelbrock Performer. If that doesn't impress me, I'll find a different one. With a T5, high compression (gotta love local E85 at the pump), and 3:73's out back, I feel I can get by with a cam that shifts the power up the rpm range a bit. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #7 – February 19, 2015, 09:30:49 PM I'd go with an F cam then.. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #8 – February 20, 2015, 10:05:47 PM I have an e cam and performer rpm intake that I can let go. PM me if interested. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #9 – February 20, 2015, 10:57:55 PM If jangus doesn't want it, I'd be interested. :) Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #10 – February 22, 2015, 01:37:02 AM Quote from: Lightningbird;445037I have an e cam and performer rpm intake that I can let go. PM me if interested.PM sent sir. Quote Selected
WANTED: Aftermarket performance cam for 302 Reply #11 – February 22, 2015, 04:04:08 PM I replied to your pm, btw if you want to put 1993 cobra intake, heads, rockers, computer, MAF and wiring harness in it, I have all that too! I can make a cool deal on that as well. I will be selling all of my cool horde of Ford Mustang stuff in the next few weeks and it's no better time than now to make an announcement. It's a cobra for the love of God, it needs all the good cobra stuff. Quote Selected
Topic: WANTED: Aftermarket performance cam for 302 (Read 1187 times)
previous topic - next topic
