Skip to main content ↑ ↓
Topic: dead pedal install (Read 1133 times) previous topic - next topic

dead pedal install

First off the search function either sucks or I cant use it correctly!

It seems where I want to bolt the dead pedal to the sheetmetal, there is the bracket for the push plug for the trim piece.  I cant seem to fit it closer to the firewall, there is not enough room for it.  What the hell have you guys done?  It just bolted right in on the Mustangs. :shakeass:
Mike

dead pedal install

Reply #1 –
I was hoping I had a pic w/o the panel in place, but no luck. You can see mine is below the push pin though

gumby - beauty may fade, but stupid is forever!

dead pedal install

Reply #2 –
I bolted mine right to the push pin bracket
Fox-less at the moment
 

dead pedal install

Reply #3 –
Mine is also a little under the push pin hole.

'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..