Skip to main content
Topic: Looking for stock 5.0 EFI parts (Read 1122 times) previous topic - next topic

Looking for stock 5.0 EFI parts

Hey all.

I'm looking for some EFI port injection stuff, like from an 86-93 Mustang.

Interested in stock items. Not looking for anything fancy.

The list:
- Upper and lower intakes (Don't have to be Mustang or Fox, so Tbird, SN-95, etc would be OK)
- Throttle body
- fuel rail and injectors (19#ers would be fine)
- set of stock factory Mustang tubular exhaust manifolds.

Let me know

Thanks!
Chuck
Long live the 4-eyes!  - '83 Tbird Turbo

Re: Looking for stock 5.0 EFI parts

Reply #1
Chuck, I have the headers for sure, *may* have the upper/lower, and likely have the t-body.

I'd have to check to see of I have a rail, I do know I have a set of good 19# injectors for sure though.
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6

Re: Looking for stock 5.0 EFI parts

Reply #2
Let me know. I'm eyeing a couple things on ebay as well.

I'm just looking for basic STOCK stuff. Just wanting to rid the LTS of the TBI set-up for the time being, as it's 3.7/6R80 is going into another project. (Like I NEED yet ANOTHER project). :crazy:
Long live the 4-eyes!  - '83 Tbird Turbo

Re: Looking for stock 5.0 EFI parts

Reply #3
Will do. Headed out to the shop now, if you like, I can text or message pics of what I do have.
'84 Mustang
'98 Explorer 5.0
'03 Focus, dropped a valve seat. yay. freakin' split port engines...
'06 Explorer EB 4.6

Re: Looking for stock 5.0 EFI parts

Reply #4
I think I have what I need for now. (Thanks, Beau!)

I might try and find a harness to pirate stuff from, but I know I'll be building one for the most part.
Long live the 4-eyes!  - '83 Tbird Turbo

Re: Looking for stock 5.0 EFI parts

Reply #5
So, I'm looking for an injector harness for a 5.0.

I thought I was going to need more of a harness, but I can make use of most the CFI harness and just need to deal with hooking up the injectors.

Let me know what you have. Thanks!
Long live the 4-eyes!  - '83 Tbird Turbo

Re: Looking for stock 5.0 EFI parts

Reply #6
We are getting slammed by snow this week, but I will check tomorrow. I think I have 2-3 off 87 cars in storage.
Quote from: jcassity
I honestly dont think you could exceed the cost of a new car buy installing new *stock* parts everywhere in your coug our tbird. Its just plain impossible. You could revamp the entire drivetrain/engine/suspenstion and still come out ahead.
Hooligans! 
1988 Crown Vic wagon. 120K California car. Wifes grocery getter. (junked)
1987 Ford Thunderbird LX. 5.0. s.o., sn-95 t-5 and an f-150 clutch. Driven daily and going strong.
1986 cougar.
lilsammywasapunkrocker@yahoo.com

Re: Looking for stock 5.0 EFI parts

Reply #7
Still looking for an injector harness.
Long live the 4-eyes!  - '83 Tbird Turbo

Re: Looking for stock 5.0 EFI parts

Reply #8
So, I'm looking for an injector harness for a 5.0.

I thought I was going to need more of a harness, but I can make use of most the CFI harness and just need to deal with hooking up the injectors.

Let me know what you have. Thanks!
What year harness?


IIRC I have 3 specific to an 87.

One if them has the mass air conversion hard wired in if you're gonna cam swap.
-- 05 Mustang GT-Whipplecharged !!
--87 5.0 Trick Flow Heads & Intake - Custom Cam - Many other goodies...3100Lbs...Low12's!

Re: Looking for stock 5.0 EFI parts

Reply #9
Here is the EEC IV pinout the 5.0L CFI from the 84 Ford shop manual. May be useful if you want to rework it for SEFI.

Re: Looking for stock 5.0 EFI parts

Reply #10
I basically just need the harness for the injectors.

This is getting connected to a MegaSquirt, which only has 2 injector banks. I'm going to adapt the injector harness into the old CFI harness that went to the TBI unit. Basically batched like the 85-87 trucks.

(I have all of the wiring diagrams, etc)

I haven't delved into it too much here, as it's an "other" project (The 85 LTS).

I have an OLD EECIV to MS adapter board that I'm using, to just tie the MS unit directly into the existing harness on the CFI 5.0 with a couple modifications on the engine side.

Long live the 4-eyes!  - '83 Tbird Turbo

Re: Looking for stock 5.0 EFI parts

Reply #11
Still looking for an injector harness.

Also will be needing a good TV cable for the AOD, as my current TV rod will not work.
Long live the 4-eyes!  - '83 Tbird Turbo

 

Re: Looking for stock 5.0 EFI parts

Reply #12
Still looking for both items.
Long live the 4-eyes!  - '83 Tbird Turbo