Manual Pedal assembly December 28, 2017, 06:04:07 PM is the tbird manual pedal assembly the same as the mustang? Was wondering if I can use a mustang cable and quadrant as I am going to a 10,5 clutch on my 2.3T Quote Selected
Manual Pedal assembly Reply #1 – December 28, 2017, 06:19:39 PM I'm sure they are different. That would explain why everyone needs a Fox Stang setup. The Fox uses a cable, the Bird was hydraulic for the clutch Quote Selected
Manual Pedal assembly Reply #2 – December 28, 2017, 07:37:19 PM You will need a different Bell housing that will allow you to mount the cable. One from a 4 cylinder mustang will work Quote Selected
Manual Pedal assembly Reply #3 – December 29, 2017, 09:59:40 AM All of the Fox Mustang pedal assemblies are getting old enough that if you go that route I would suggest replacing the bushings on the clutch and brake pedal shaft assembly.https://lmr.com/item/LRS-2471A/79-04-Mustang-Clutch-Pedal-Support-Bushing?gclid=EAIaIQobChMI-P713byv2AIViCSBCh1S1A2lEAQYBCABEgLIHPD_BwE Quote Selected
Topic: Manual Pedal assembly (Read 1251 times)
previous topic - next topic
