Skip to main content
Topic: Looking for stock Maf tubes (Read 455 times) previous topic - next topic

Looking for stock Maf tubes

I need the two rubber tubes off an 89-93 mustang 5.0 with maf.
One 88

Looking for stock Maf tubes

Reply #1
Pees and Carrots!
One 88

Looking for stock Maf tubes

Reply #2
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=170303500834

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=250375230280

http://cgi.ebay.com/ebaymotors/Mass-Air-Sensor-Mustang-5-0-w-plug-79-93-87-93-LX-GT_W0QQitemZ120379529346QQihZ002QQcategoryZ33557QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for stock Maf tubes

Reply #3
Vinnie you have eBay super powers.  I looked a week ago and nothing like that was there!  Thank you.
One 88

Looking for stock Maf tubes

Reply #4
I do try to use my powers for the good of man kind.
'88 Sport--T-5,MGW shifter,Trick Flow R intake,Ed Curtis cam,Trick Flow heads,Scorpion rockers,75mm Accufab t-body,3G,mini starter,Taurus fan,BBK long tube headers,O/R H-Pipe, Flowamaster Super 44's, deep and deeper Cobra R wheels, Mass Air and 24's,8.8 with 3.73's,140 mph speedo,Mach 1 chin spoiler,SN-95 springs,CHE control arms,aluminum drive shaft and a lot more..

Looking for stock Maf tubes

Reply #5
Found this on SBFTECH.com, He's located in TN.

I have a few thing im getting ready to trash unless someone needs it.

several sets of fox fuel rails with and without regulators
efi distributor's
50 oz balancers
stock intakes,TB's maf's
etc etc if you need anything just ask and i'll see if I have it
but it will all be gone by the weekend 2-28-09

Thanks
Brad
865-323-6844
84 TC 302 -5.0L/t5/7.5 locking rear and a 3.45 gear, Edelbrock Intake, Aluminum Heads, Edlebrock 65mm Throttlebody, Edlebrock Cam, 24lb injectors & MAS Air Sensor calibrated via chip,  BBK headers, Catback H pipe, Magnaflow lers :evilgrin:
:pics-stfu:

 Project Thread with pics